Nozzle Temperature:
260˚C – 280˚C
Printing Speed:
30mm/s – 50mm/s
Bed Temperature:
100˚C – 115˚C
Chamber Temperature:
100˚C – 110˚C
Bed Surface:
Almost any surface with a thin coat of PVA glue or MAGIGOO PC
Cooling Fan:
OFF
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
MECHANICAL PROPERTIES
Young's Modulus:
1986 ± 85 (MPa)
Glass Transition Temperature:
140 (˚C)
Vicat Softening Temperature:
139 (˚C)
Melting Temperature:
223 (˚C)
Drying Settings:
75˚C for 6h
Recommended Support Materials:
N/A
Other:
When printing with Polymaker™ PC-PBT it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress when not using a heated chamber.
Annealing settings: 90˚C for 2h