Prusament PETG Ultraglow Green 800g (NFC) 1.75mm Spool

Prusament PETG Ultraglow green is the brightest glow-in-the-dark filament on the market. It is filled with the highest possible amount of strontium aluminate, which is a safe alternative to previously used Phosphorus. We used the maximum we could achieve while maintaining reliable printability and delivering exceptionally bright luminescence. We felt like there was no strong reason to make another mediocre glow-in-the-dark PLA filament, as the market already has plenty. Instead, we did what we do best: we took it up to eleven.

Glows all night long

Visible glow after 6-8 hours

Prusament PETG Ultraglow can be charged by exposing it to both UV (most effective) and visible light sources. When charged, the filament glows strongly for several minutes, then the glow intensity gradually decreases. In total darkness, a weak glow can be visible even after 6-8 hours after charging.

Brightest of them all

Filled with glowing powder to the maximum

We ordered other branded glowing filaments and put them all to the test. We've kept the other brands anonymous, as the results speak for themselves. Prusament PETG Ultraglow shines by far the brightest when compared to common glow-in-the-dark PLA.

Bonded in Prusament PETG

For better mechanical and temperature resistance

We deliberately chose PETG as the base polymer for a reason: it's stronger than commonly used PLA and resists higher temperatures, making it suitable for functional parts. And you can take it further with the XL and other multimaterial solutions. Print functional models in standard PETG and add glowing accents to highlight specific components - switches, handles, indicators, or any part that needs visibility in low light.

Printing Setup