Wanhao Duplicator 9 Adjustment Process

Wanhao Duplicator 9 has very rigid structure . During shipping the vslot wheels tension-er might get loose and result in prints finish issues . 

In this post we will provide step by step guide on how to set the wanhao D9 to get great prints . 

1- Check the the vslot wheels for the y, x and z axis  by moving them sideways and see if they are loose or too tight the screw set --marked with arrows in Fig(1)  --as required . 

2- Loose the z axis lead screw nut by loosing the four screw marked below both sides . This way any binding in the z-axis will not affect the print quality (see Fig.(2))

3- Remove the tension springs off the belt and readjust the x-axis and y-axis belts as shown (Fig.3)

Our 3d printers makes amazing quality !