- Home
- 3D Printer Parts
Keep your printer running with our wide selection of upgrades.
We provide upgrades for nozzles, heat breaks, heat sinks, extruders and much more. We only source from the best manufacturers in the business. From Bondtech, Micro Swiss, E3D, Duet, Flashforge, Creality, Intamsys, Capricorn and many more.
Digitmakers.ca is your one-stop shop for your 3D printer needs.
Keep 3D Printing, Canada!
3D Printer Parts
Wanhao Duplicator 7 Mother Board v1.3
$99.99 CAD
Wanhao Duplicator 7 Mother Board v1.2. Original Wanhao Part.
Endstop Cable 2-Pin Connector
$2.99 CAD
1000mm thermistor or endstop cable. Red/Black colour coding. Dupont connector suits plugging into boards like RAMPS etc.
Wanhao D6 Plus /D9 Extruder Board V1.7
$19.99 CAD
Interface board V1.7 for Wanhao D6 and D9. Mounts behind extruder.
Wanhao D9 BL Touch Board V1.1
$9.99 CAD
BL Touch board V1.1 for Wanhao D9.
Flashforge Adventurer 3 LCD TouchScreen
$55.99 CAD
LCD Touch Screen for Flashforge Adventurer 3. Size: 3" Version: V1.0.5
Wanhao D6 Interface Board V1.2
$9.99 CAD
Interface board (keyset, patching board) V1.2 for Wanhao Duplicator D6.
Flashforge Adventurer 3 Nozzle Adapter Board
$4.99 CAD
Nozzle Adapter Board for Flashforge Adventurer 3. Original part.
Flashforge Adventurer 3 Camera
$29.99 CAD
Camera for Flashforge Adventurer 3.
Flashforge Filament Detector Board
$9.99 CAD
Spare part. Original filament detector board for Flashforge Finder, Guider II, Guider IIs, Inventor II, and Inventor IIs 3D printer models. Version: v0.3 Comes with the runout board and connector board Important for Finder: the version number of the faulty board must be the same as the one depicted here, see images.
Flashforge Creator Pro / Dreamer Heatbreak
$14.99 CAD
Aluminum tube that connects the extruder aluminum block and aluminum strip for the Creator Pro and Dreamer, and connects the heat sink and aluminum block of the Finder. Note: only works with updated nozzles. Includes 2mm (ID) x 4mm (OD) x 44mm (L) PTFE tube Applicable for select Wanhao models.
Flashforge X Sensor Switchboard V0.4 for Inventor/Guider2
$9.99 CAD
X-Sensor Switch Board Specially designed for the Flashforge Inventor/Guider2 3D printers.
Flashforge Dreamer/Inventor DC Brushless Case Fan
$17.99 CAD
Rear case fan for Flashforge Dreamer and Inventor. 80 x 80 x 15 mm, 24V
Wanhao D9 / 6Plus / i3 Plus MK2 - Power Resume Cable 20cm
$9.99 CAD
Power Resume Cable 20cm for Wanhao 3D printers This Wanhao factory replacement part is compatible with: Wanhao Duplicator 9 D9/300/400/500 Wanhao Duplicator 6 Plus Mark II Wanhao Duplicator i3 Plus V2.0 Mark II
Flashforge Finder Extruder Assembly Motor Cable
$4.99 CAD
Spare part. Original cable for Flashforge Finder extruder assembly.
Flashforge Y-Axis Sensor Cable
$12.99 CAD
Y-Axis Sensor Cable for Flashforge Dreamer, Inventor, Finder and Guider 2. Original Flashforge part.
Flashforge Z-Axis Sensor Cable
$12.99 CAD
Z-Axis Sensor Cable for Flashforge Dreamer, Inventor, Finder and Guider 2. Original Flashforge part.
Flashforge Creator Pro Build Plate Cable
$14.99 CAD
Original Flashforge Build Plate Cable for Creator Pro 3D Printer.
Generic Female 3-Pin Cable Connector 700mm
$2.99 CAD
700mm 3-pin female to female cable. Red/Black/Green colour coding. Dupont connector suits plugging into boards like RAMPS etc.
Bondtech DDX v3 For Creality 3D Printers
$129.99 CAD
The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden extruder with a direct drive extruder setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared. Multiple Hotends Compatibility This model was created to be compatible with the original hotend of ...
M3 Screw Set 240 pcs
$29.99 CAD
240pcs/Box 304 stainless steel inner hexagon screw round head inside hexagonDIN912 Include in the box 20pcs x M3*4 20pcs x M3*5 20pcs x M3*6 20pcs x M3*8 20pcs x M3*10 20pcs x M3*12 20pcs x M3*16 20pcs x M3*20 20pcs x M3*25 60 pcs x M3 Nuts
T-Nut-M3 -2020 Drop In Post Assembly Pack of 10
$4.50 CAD
slim metal nuts slide into the side-slot of the extrusion. The slightly oval shape means that as they screwed-into the nut jams against the slot. T nut for aluminum profile. Size: M3 Profile: 2020 Bag of 10 pcs
T-Nut-M4 -2020 Drop In Post Assembly Pack of 10
$4.50 CAD
slim metal nuts slide into the side-slot of the extrusion. The slightly oval shape means that as they screwed-into the nut jams against the slot. T nut for aluminum profile. Size: M4 Profile: 2020 Bag of 10 pcs
T-Nut-M5 -2020 Drop In Post Assembly Pack of 10
$4.50 CAD
slim metal nuts slide into the side-slot of the extrusion. The slightly oval shape means that as they screwed-into the nut jams against the slot. T nut for aluminum profile. Size: M5 Profile: 2020 Bag of 10 pcs
Aluminum Extrusion 1 Meter/1.5 Meter 2020 V-Slot STORE PICK UP ONLY
$19.99 CAD
Note: Store pick up only. We are unable to economically ship this product Specifications: Made of 6063 aluminum Protective Film Black or Silver
Sliding T Nuts x 10 Pieces - Various Size
$4.50 CAD
Sliding T nut Sold in Pack of 10 Size: M3 , M4, M5 Sold in 10 pieces Profile: 2020 Nickel Plated
Aluminum Extrusion 1 Meter/1.5 Meter 2040 V-Slot STORE PICK UP ONLY
$35.99 CAD
Note: Store pick up only. We are unable to economically ship this product Specifications: Made of 6063 aluminum Protective Film Black or Silver
Aluminum Extrusion 1 Meter/1.5 Meter 3030 T-Slot STORE PICK UP ONLY
$21.99 CAD
Note: Store pick up only. We are unable to economically ship this product Specifications: Made of 6063 aluminum Protective Film Black or Silver
Stainless Steel Button Head Cap Screw - Various Sizes - Pack of 10
$1.80 CAD
Various Size Stainless Steel Button Head Cap Screws Available in the following sizes: M3 M5 M6 M8 Available in the following lengths: 8 mm 10 mm 12 mm 16 mm 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm
Stainless Steel Socket Head Screw - Various Sizes - Pack of 10
$2.60 CAD
Various Size Stainless Steel Button Head Cap Screws Available in the following sizes: M2 M3 M4 M5 M6 M8 Available in the following lengths: 6 mm 8 mm 10 mm 12 mm 16 mm 18 mm 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm
Stainless Steel Nyloc Hex Nuts - Various Sizes - Pack of 10
$1.20 CAD
Various Size Stainless Nyloc Hex Nuts Available in the following sizes: M3 M4 M5 M6 M8
Stainless Steel Flat Washers - Various Sizes - Pack of 10
$1.00 CAD
Various Size Stainless Flat Washers Available in the following sizes: M2 M3 M4 M5 M6 M8
Stainless Steel Hex Nuts - Various Sizes - Pack of 10
$0.60 CAD
Various Size Stainless Hex Nuts M2 M3 M4 M5 M6 M8
Bondtech DDX PH4 HeatLink 300°C Thermistor
$14.99 CAD
To use this product, add to cart the correct Heatlink Interface Cable to connect this thermistor to your printer. Check the compatibility table below. Bondtech HeatLink JST XH-2 With LockBondtech HeatLink JST XHP-2Bondtech HeatLink JST SMP-02V-BC Bondtech HeatLink 300°C Thermistor This 300C thermistor based on the SeMitec 104NT-4-R025H42G temp...
Bondtech HeatLink JST XH-2 With Lock
$4.99 CAD
This product is meant to be used as an interface cable for the Bondtech Heatlink 300C Thermistor. Plug & Play Interface Cable – JST XH-2 With Lock 50mm Interface cable with Molex micro-fit 3.0 male connector on one end JST XH-2 With Lock connector on the other. Packed in plastic bag. To connect 300°C thermistors to Creality CR-10s Pro Cr...
Bondtech HeatLink JST XHP-2
$4.99 CAD
This product is meant to be used as an interface cable for the Bondtech Heatlink 300C Thermistor or 50W Heater. Plug & Play Interface Cable – JST XHP-2 50mm Interface cable with Molex micro-fit 3.0 male connector on one end JST XHP-2 connector on the other. Packed in plastic bag. To connect 300°C thermistors to Creality Ender-3 Crealit...
Bondtech HeatLink JST SMP-02V-BC
$4.99 CAD
This product is meant to be used as an interface cable for the Bondtech Heatlink 300C Thermistor or 50W Heater. Plug & Play Interface Cable – JST SMP-02V-BC 50mm Interface cable with Molex micro-fit 3.0 male connector on one end JST SMP-02V-BC connector on the other. Packed in plastic bag. To connect 300°C thermistors to Creality Ender-5...
Bondtech HeatLink 12v 50W Heater
$14.99 CAD
To use this product, add to cart the correct Heatlink Interface Cable to connect this thermistor to your printer. Check the compatibility table below. Bondtech HeatLink JST-XHP-2 Bondtech HeatLink JST VRH-2N Bondtech HeatLink JST SMP-02V-BC Bondtech Heatlink Ferrule Plug & Play Heater 1.5m leads with red sleeves and Molex micro-fit 3.0 ...
Bondtech HeatLink JST VHR-2N
$4.99 CAD
This product is meant to be used as an interface cable for the Bondtech 50W Heater. Plug & Play Interface Cable – JST VHR-2N 50mm Interface cable with Molex micro-fit 3.0 male connector on one end JST VHR-2N connector on the other. Packed in plastic bag. To connect 300°C thermistors to no models listed for now To connect 50W hea...
Bondtech HeatLink Ferrule
$4.99 CAD
This product is meant to be used as an interface cable for the Bondtech 50W Heater. Plug & Play Interface Cable – Ferrule 50mm Interface cable with Molex micro-fit 3.0 male connector on one end Ferrule connector on the other. Packed in plastic bag. To connect 300°C thermistors to no models listed for now. To connect 50W heaters...
Bondtech HeatLink 24v 50W Heater
$14.99 CAD
To use this product, add to cart the correct Heatlink Interface Cable to connect this thermistor to your printer. Check the compatibility table below. Bondtech HeatLink JST-XHP-2 Bondtech HeatLink JST VRH-2N Bondtech HeatLink JST SMP-02V-BC Bondtech Heatlink Ferrule Plug & Play Heater 1.5m leads with black sleeves and Molex micro-fit 3....
Bondtech DDX V3 Adapter Set for CR-10V2 & CR-10V3
$84.99 CAD
This product is meant to be used for the Creality DDX v3 Direct Drive Extruder Compatible with DDX v3, now even easier to install; Fit a Direct Drive eXtruder on the CR-10 v2 and CR-10 v3; Plastic Parts made of PA12 (Nylon) with the SLS 3D printing process; Better surface finishing and higher working temperature resistance; Improved bowden and...
Bondtech DDX v3 Adapter Set For Creality Ender/CR-10
$49.95 CAD
This product is meant to be used for the Creality DDX v3 Direct Drive Extruder Requires your printer to have a 40x40x10mm radial fan. The DDX v3 is much easier to install With the integrated fan shroud and mount included in the DDX v3 adapter sets, the DDX v3 is even easier to install. Snap the fan to the shroud without using screws. Adjust...
Bondtech DDX v3 Adapter Set For Creality CR-10(S)Pro/Max
$55.95 CAD
This product is meant to be used for the Creality DDX v3 Direct Drive Extruder This set is necessary to install a DDX v3 Upgrade Kit on the compatible models. Requires your printer to have a 40x40x10mm radial fan. The DDX v3 is much easier to install With the integrated fan shroud and mount included in the DDX v3 adapter sets, the DDX v3...
Wanhao D9 Heating Cartridge Tube
$19.99 CAD
Wanhao D9 Heating Cartridge Tube for hotend. 24V, about 150mm
Flashforge Finder / Inventor 2 LCD Touchscreen Replacement
$74.99 CAD
Replacement LCD touchscreen for the Flashforge Finder / Inventor 2 (24V)
Binder Clips for Bed Leveling (pack of 4)
$2.99 CAD
Binder clips to hold the glass plate on the heatbed. Comes in a pack of 4
Creality CR6-SE Mainboard Version 1.1.0.3
$74.99 CAD
Creality CR-6 SE Mainboard Era v1.1.0.3 Features: Silent steppers 32-bit control chip
Creality CR-30 3DPrintMill Silent Mainboard Version 4.2.10
$72.99 CAD
Creality CR-30 3DPrintMill Silent Mainboard Version 4.2.10