Taulman Alloy 910-Black-1.75mm 1lb

Alloy 910 is a substantial advancement in 3D Printing materials technology from taulman3D. Designed to be extremely strong without any composite fillers, for use in high temperature and high durability applications such as industrial parts and robotics. It is a high quality filament designed to be easy to print with.

With a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals the t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.

NOTE:  Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS!

• 8,100 Tensile Strength
• 32% Elongation
• FDA CFR177.1500
• Super low shrinkage
• Easy support removal
• Chemicals resistance of Nylons
• Printing Temp.:250°C - 255°C
• Nozzle = any size
• Print speed = ABS speeds
• Retraction = 1mm/.1mm nozzle or for a .5mm nozzle = 5mm
• Print bed = Glass heated to 45C with coat of PVA. Can be printed without a heated bed on a sheet of BuildTak with a coat of PVA.
• For ALL Nylon based materials, users should turn "OFF" any fans that blow on the printed part unless it's a very small part of less than 10mm sqr. = Alloy 910, 618, 645, Bridge, PCTPE, 680 and 230