Your cart is empty
Looks like you haven't added anything to your cart yet
|
Arctic Whisper (10900) | ||
|
Blueberry Bubblegum (10905) | ||
|
Cotton Candy Cloud (10907) | ||
|
Dusk Glare (10906) | ||
|
Ocean to Meadow (10902) | ||
|
Pink Citrus (10903) | ||
|
Solar Breeze (10901) | ||
|
Mint Lime (10904) |
Soft Bicolor Gradient Appearance
The soft transition between two colors creates a vibrant and stunning visual effect on printed models.
Display of Gradient Prints
Gradient colors make it ideal for printing pretty toys or decorations.
High printing speed with delicate finish
Up to 300mm/s (with 0.4mm nozzle) printing speed while maintaining delicate and refined finish.
Excellent Layer Adhesion
As new color options in the PLA Basic series, the gradient filament retains similar performance to PLA Basic while providing even stronger layer adhesion and toughness, reducing the risk of printed parts breaking.
Z-layer Performance
| Layer Adhesion (Impact Strength - Z) | Improved % | |
| Normal Matte PLA | 6.6 kJ/m² | 261% |
| Bambu PLA Basic Gradient | 23.8 kJ/m² | |
| Specimens：20*2*80 mm³ | ||
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
| Drying Settings (Blast Drying Oven) | 55 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with PVP Glue) | 35 - 45 °C |
| Printing Speed | < 300 mm/s |
Physical Properties
| Density | 1.24 g/cm³ |
| Vicar Softening Temperature | 57 °C |
| Heat Deflection Temperature | 57 °C |
| Melting Temperature | 160 °C |
| Melt Index | 42.4 ± 3.5 g/10 min |
Mechanical Properties
| Tensile Strength | 36 ± 2 MPa |
| Breaking Elongation Rate | 15.2 ± 0.5 % |
| Bending Modulus | 2270 ± 60 MPa |
| Bending Strength | 73 ± 3 MPa |
| Impact Strength | 61.2 ± 2.8 kJ/m² |
Download Filament TDS
Download Filament MSDS
Printing Tips
• PLA Basic Gradient is a new color options of PLA Basic series, please use the default PLA Basic setting for printing. To obtain higher printing quality, please set lower printing speed (layers speed and acceleration).
• Gradient Length: 8 ~ 10 meters
What's in the Box?
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1
No reviews yet.
- Choosing a selection results in a full page refresh.