Your cart is empty
Looks like you haven't added anything to your cart yet
|
Red Granite | ||
|
White Marble |
Bambu PLA Marble
Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with PVP Glue) | 35 - 45 °C |
| Printing Speed | < 250 mm/s |
Physical Properties
| Density | 1.22 g/cm³ |
| Vicar Softening Temperature | 57 °C |
| Heat Deflection Temperature | 56 °C |
| Melting Temperature | 156 °C |
| Melt Index | 32.2 ± 4.5 g/10 min |
Mechanical Properties
| Tensile Strength | 42 ± 3 MPa |
| Breaking Elongation Rate | 6.7 ± 0.5 % |
| Bending Modulus | 2490 ± 150 MPa |
| Bending Strength | 85 ± 5 MPa |
| Impact Strength | 24.0 ± 2.5 kJ/m |
Download Filament TDS
Download Filament MSDS
What's in the Box:
Filament*1 & Desiccant*1
Instructions*1 & Spool Sticker*1
Package*1
Filament Label*1
No reviews yet.
- Choosing a selection results in a full page refresh.