Your cart is empty
Looks like you haven't added anything to your cart yet
|
Scarlet Red | ||
|
Charcoal | ||
|
Marine Blue | ||
|
Ivory White | ||
|
Ash Gray |
Recommended Printing Settings
| Drying Settings (Blast Drying Oven) | 55 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with PVP Glue) | 35 - 45 °C |
| Printing Speed | < 300 mm/s |
Physical Properties
| Density | 1.31 g/cm³ |
| Vicar Softening Temperature | 63 °C |
| Heat Deflection Temperature | 58 °C |
| Melting Temperature | 163 °C |
| Melt Index | 39.4 ± 3.2 g/10 min |
Mechanical Properties
| Tensile Strength | 32 ± 3 MPa |
| Breaking Elongation Rate | 32.8 ± 4.3 % |
| Bending Modulus | 2360 ± 250 MPa |
| Bending Strength | 53 ± 2 MPa |
| Impact Strength | 19.2 ± 3.7 kJ/m² |
Printing Tips
• Drying conditions: 50℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box:
Filament *2 Package*1
No reviews yet.
- Choosing a selection results in a full page refresh.