Your cart is empty
Looks like you haven't added anything to your cart yet
|
Alpine Green Sparkle | ||
|
Crimson Red Sparkle | ||
|
Onyx Black Sparkle | ||
|
Slate Grey Sparkle | ||
|
Royal Purple Sparkle | ||
|
Classic Gold Sparkle |
Bambu PLA Sparkle
Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.
However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with PVP Glue) | 35 - 45 °C |
| Printing Speed | < 250 mm/s |
Physical Properties
| Density | 1.26 g/cm³ |
| Vicar Softening Temperature | 57 °C |
| Heat Deflection Temperature | 55 °C |
| Melting Temperature | 156 °C |
| Melt Index | 34.2 ± 3.3 g/10 min |
Mechanical Properties
| Tensile Strength | 39 ± 3 MPa |
| Breaking Elongation Rate | 11.7 ± 0.7 % |
| Bending Modulus | 2350 ± 140 MPa |
| Bending Strength | 75 ± 4 MPa |
| Impact Strength | 66.5 ± 3.6 kJ/m² |
What's in the Box:
Filament*1 & Desiccant*1
Instructions*1 & Spool Sticker*1
Package*1
Filament Label*1
No reviews yet.
- Choosing a selection results in a full page refresh.