CARBONX™ Carbon Fiber Nylon 6 (Gen 3) Filament - Black 1.75mm 500g - Digitmakers.ca
CARBONX™ Carbon Fiber Nylon 6 (Gen 3) Filament - Black 1.75mm 500g - Digitmakers.ca

CARBONX™ Carbon Fiber Nylon 6 (Gen 3) Filament - Black 1.75mm (Various Weight)

$86.95
Size:
500G

Product variant with selected options does not exist!
View all options as a list
In stock and ready for shipping
Ships from Canada Technical support available Pickup or delivery options
SKU: 3DXTECH-FL-NYL6-CF-1.75-500G-BLK

Gen 3 CarbonX™ Nylon 6+CF Carbon Fiber Reinforced 

Gen 3 CarbonX™ PA6+CF filament is formulated using a PA6 copolymer reinforced with high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing. Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.

Unparalleled rigidity gives designers the properties they need to make their 3D printed parts with less material and save weight without sacrificing stiffness.

Gearbox HT2™ 3D Printer: Print industrial-grade parts using our PA6+CF and more with the new Gearbox™ HT2 High-Temp 3D Printer.

Print Recommendations



  • Extruder Temp 240-270°C
  • Bed Temp 80-110°C
  • Heated Chamber Not required, but improves layer bonding
  • Nozzle Specs 0.4mm diameter minimum Hardened Steel Nozzle
  • Bed Adhesion Magigoo Bed Prep
  • Layer Height 0.25mm or higher
  • Drying Specs 90°C for 4 hours
  • Supports Water Soluble Support

Benefits of Nylon PA6+CF:

  • Excellent printability
  • High tensile strength and rigidity
  • Abrasion and wear resistance
  • Improved chemical resistance over traditional 3D printing materials
  • High thermal properties

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

  • Extruder: 240-270°C
  • Bed Temp: 80-110°C
  • Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
  • Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
  • Heated Chamber: Not required, but a heated chamber between 30-80°C allows for superior layer bonding and mechanical properties
  • Supports: Water soluble AquaTek X1 USM works great for complex parts.
  • Drying Instructions: 90°C for 4 hours.

 

 

 


Carbon Fiber Reinforced Filament


What Is It?

Fibers 5-10 micrometers wide made of carbon. The fibers are aligned following the axis of the material.

This, along with their physical makeup, are what give this material its excellent properties.


What Does It Do?

Carbon Fibers demonstrate a lot of desirable material properties:

  • High stiffness
  • High tensile strength
  • High heat tolerance
  • High chemical resistance
  • Low weight
  • Low thermal expansion

How Does It Work?

Reinforcing plastic with carbon fibers produces a 3D printing filament which exhibits the best properties of both the carbon fibers and the plastic of choice.


What Is It Good For?

Ideal for any applications which require light weight and rigidity.

Carbon fiber reinforced parts, designed to use less material and save weight, is extremely popular in aerospace, civil engineering, the military, and motorsports.

 

Abrasive Material

This material is particularly abrasive among 3D printing filaments. Users may find standard brass nozzles are chewed through very quickly compared to standard wear and tear. When worn through, the nozzle diameter will widen inconsistently and the printer will experience extrusion issues.


Because of this, it's strongly recommended this material be printed through a hardened steel nozzle rather than a softer metal. Hardened steel nozzles can often be inexpensive and easily installed depending on your printer manufacturer's instructions.

          No reviews yet.

          Recommended for You

          Browsing history

          Request a Quotation

          Book a Demo