Your cart is empty
Looks like you haven't added anything to your cart yet
|
Black | ||
|
White |
colorFabb Tough PLA
ColorFabb Tough PLA 3D printing filament features a better balance between material toughness and ease of 3D printing. The new formulation increases impact strength with 70% while retaining most of it’s tensile strength.
Tough PLA can be printed at slightly higher temperatures then regular PLA for improved performance and enhanced material flow during printing. Most 3D printers will work well with temperatures from 210C up to 230C. Tough PLA is easy to print and requires little effort to get good quality printed parts, it’s the perfect beginner material with excellent mechanical properties.
|
Material: colorFabb Tough PLA |
|
Diameter Tolerance: ± 0.1 mm |
|
Density: 1,2-1,3 g/cm3 |
|
Glass Transition Temperature: 55C |
Printing Advice
Here are tips and tricks for using colorFabb 3d printing filament.
|
Advised 3D printing temperature 210C-230C |
|
Advised 3d print speed 40-50 mm/s |
|
Advised Heated bed 50-60C |
|
Cooling fan Use the least amount of cooling for best layer-to-layer adhesion. For better overhang performance use 50-100% cooling. |
No reviews yet.
- Choosing a selection results in a full page refresh.