Your cart is empty
Looks like you haven't added anything to your cart yet
Based on colorFabb_XT, XT-CF20 is a carbon fiber composite material. Loaded with no less than 20% specially sourced carbon fibers we have developed a very stiff and tough 3D printing filament made for functional parts. It is truly a professional printers go-to material, especially for users looking for high melt strength, high melt viscosity and good dimensional accuracy and stability.
Please note: A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use from stainless steel nozzles or nozzles made with hardened copper alloys.
- Carbon Fiber
- Tough
- Matte surface finish
|
Material: colorFabb XT-CF20 |
|
Diameter Tolerance: ± 0.05 mm |
|
Density: - |
|
Glass Transition Temperature: |
DOWNLOAD TDS
Printing Advice
|
Advised 3D printing temperature 240-260C |
|
Advised 3d print speed 40 - 70 mm/s |
|
Advised Heated bed |
| Cooling fan - |
TIP! For colorFabb_XT we advice to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.
No reviews yet.
- Choosing a selection results in a full page refresh.