D3D Premium Matte PLA Filament 1.75mm, 1kg Spool

New Low-Gloss Matte PLA!

1kg (2.2lbs) spool of D3D premium PLA filament that comes with a resealable bag and a desiccant pack.

Please note this material is high Density Material. The printed part will be heavier than regular PLA material . Please print it with Lower speed to ensure layer adhesion and matte finish. 

Our D3D Premium Matte PLA filament is made by Ingeo 4043D Biopolymer. It is easy to use and nontoxic. Made with and bio-degradable materials derived from renewable resources. 

PLA is especially ideal for printing objects with flat surfaces, hard angles and ones requiring tight tolerances for fit.

• Material: 100% Grade A Virgin Raw Ingeo 4043D Materials
• Property: Non-Brittle Formula Blend
• Manufacturing Process:  Controlled using Non-Contact Laser Diameter Gauge:±0.03 mm Tolerance. Monitored with rapid, reproducible and repeatable measurements to exact dimensional tolerances. Maintaining high consistency of dimensional accuracy, the production process embedded with Error Proofing Mechanism (POKE-YOKE) that automatically stop a production line the moment a non-conforming measurement is detected.
• Certifications: D3D Filaments are complaint with ROH Certifications: free from any potential hazardous substances including cadmium, mercury and chromium. Please click Here For SDS Sheet

Technical Specifications

• Printing Temperature : 190°C - 230°C
• Heated Bed: PLA can be printed with or without a heated print bed, however, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.
• First layer usually 5°C-10°C higher than subsequent layers.
• Sticks well to Glass with PVA Glue, BuildTak, PEI, or blue tape.
• Cooling Fan: Highly recommended.