{"id":1250585313316,"title":"E3D Cyclops+ 1.75mm 12v","handle":"e3d-cyclops","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eDual Extrusion+\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSame great printing performance and possibilities; new compatibility and features.\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eIt’s always been possible to get great results using Cyclops and Chimera, but Cyclops in particular was something of an outlier in our ecosystem. Customers often found it hard to use, and we felt that our dual-extrusion system was due for an upgrade.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eFeatures:\u003c\/h3\u003e\n\u003ch4 dir=\"ltr\"\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. They also work with Capricorn bowden tubing and our water-cooling kit.\u003c\/li\u003e\n\u003cli\u003eCyclops+ and Chimera+ are both now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.\u003c\/li\u003e\n\u003cli\u003eCyclops+ retains compatibility with all previous Cyclops nozzles and heat breaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCyclops Rework\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Cyclops heater block has had a complete redesign, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.\u003c\/li\u003e\n\u003cli\u003eThe distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWater Cooling\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAn exceptionally light-weight, effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eThings to watch out for:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWe recommend only using similar plastics when “mixing” using the Cyclops+ HotEnd.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1.75mm bowden setups only\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eCyclops+ is no longer compatible with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOld-style Cyclops heater blocks\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOld-style Cyclops and Chimera heatsinks due to the increased distance between the filament inputs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBead-type temperature sensors\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-04-05T12:24:57-04:00","created_at":"2019-04-05T12:24:57-04:00","vendor":"E3D","type":"Parts","tags":["Chimera","e3D","e3d v6","electrical","mechanical","new-arrivals"],"price":11000,"price_min":11000,"price_max":11000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":10823219740708,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-V6-Cyclops+","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D Cyclops+ 1.75mm 12v","public_title":null,"options":["Default Title"],"price":11000,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10000089","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/cyclopsplus-aero.jpg?v=1594465770"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/cyclopsplus-aero.jpg?v=1594465770","options":["Title"],"media":[{"alt":"E3D Cyclops+ 1.75mm 12v - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":1509586567299,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/cyclopsplus-aero.jpg?v=1594465770"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/cyclopsplus-aero.jpg?v=1594465770","width":700}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eDual Extrusion+\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSame great printing performance and possibilities; new compatibility and features.\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eIt’s always been possible to get great results using Cyclops and Chimera, but Cyclops in particular was something of an outlier in our ecosystem. Customers often found it hard to use, and we felt that our dual-extrusion system was due for an upgrade.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eFeatures:\u003c\/h3\u003e\n\u003ch4 dir=\"ltr\"\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. They also work with Capricorn bowden tubing and our water-cooling kit.\u003c\/li\u003e\n\u003cli\u003eCyclops+ and Chimera+ are both now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.\u003c\/li\u003e\n\u003cli\u003eCyclops+ retains compatibility with all previous Cyclops nozzles and heat breaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCyclops Rework\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Cyclops heater block has had a complete redesign, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.\u003c\/li\u003e\n\u003cli\u003eThe distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWater Cooling\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAn exceptionally light-weight, effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eThings to watch out for:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWe recommend only using similar plastics when “mixing” using the Cyclops+ HotEnd.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1.75mm bowden setups only\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003eCyclops+ is no longer compatible with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOld-style Cyclops heater blocks\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOld-style Cyclops and Chimera heatsinks due to the increased distance between the filament inputs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBead-type temperature sensors\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}

E3D Cyclops+ 1.75mm 12v

Product Description
$110.00
Maximum quantity available reached.

Dual Extrusion+

Same great printing performance and possibilities; new compatibility and features.

It’s always been possible to get great results using Cyclops and Chimera, but Cyclops in particular was something of an outlier in our ecosystem. Customers often found it hard to use, and we felt that our dual-extrusion system was due for an upgrade.

Features:

  • Cyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. They also work with Capricorn bowden tubing and our water-cooling kit.
  • Cyclops+ and Chimera+ are both now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.
  • Cyclops+ retains compatibility with all previous Cyclops nozzles and heat breaks.

Cyclops Rework

  • The Cyclops heater block has had a complete redesign, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.
  • The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.
  • An exceptionally light-weight, effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing.

Things to watch out for:

  • We recommend only using similar plastics when “mixing” using the Cyclops+ HotEnd.

  • 1.75mm bowden setups only

Cyclops+ is no longer compatible with

  • Old-style Cyclops heater blocks

  • Old-style Cyclops and Chimera heatsinks due to the increased distance between the filament inputs

  • Bead-type temperature sensors

Sku: E3D-V6-Cyclops+
Vendor: E3D
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Related Products