eSUN ABS+ Filament 1.75 mm 1kg Spool - Various Colors

My favorite ABS. It prints beautifully in my QIDI Plus 4.

I have tried many brands of ABS and this is by far the best I have used.

Fantastic product. Can't believe how well it prints.

I printed this dice tower with the grey esun pla+, i promote this product for it’s price and strength

The eSun filaments are my go-to and I usually run through 2-3kg per month. Never had a bad roll from the brand regardless of ABS+, PLA, PLA+, PETG, or TPU.

Like all E-Sun + Filament the tolerances are great, Color is a great white too.

Its Esun ABS+. Its a solid go to low warp ABS. Nice matte finish. This filament hides layer lines very well. I always like how prints in Esun ABS+ black come out.

The people at digimaker are fantastic, every order are perfect. The esun abs+ filament work very well for me.

I used eSun ABS+ For my Voron 0.1 build. Printing ABS is very challenging. eSun ABS+ makes it easier. I use an insulted enclosure kept at 40°C or higher for the print on my Prusa i3mk3.

Bon filament

Ok.. here a review!. I've used a full spool before reviewing. 1- depending of you knowledge in 3d print you need to tweak to get very nice result. I've start from my PETG profile, after many try, found out that this filament under-extrude. if your know that you are really tight in your e-step then you need to print at 106% flow. 2- temperature and cooling... need to do alot of test but found out that on 105c for glass bed+glue stick, give you 0% of warp no mather the size of your print!. fan speed. found that first 5 layer 0 to10% and the rest at 10%. i'm using a 5015, will probably be more on 4010 on low side fan. 3- overhang!.. ok forget that, this stuf does not support any more then 15-20% inclination. user support!.. you fan get more if you boost up cooling fan but you will end with very bad layer adhesion.. 4- quality / durability. well i've done a tone of test with this ABS+ and here is my opinion. you really need to found the sweat spot between too hot or too cold. this stuff it pretty brittle on small parts/print. you can easly break and it snap in layers way. if you tweak correctly your settings you get a little bit better resistance. 20% inflll minimum. grid pattern nothing else. Large parts are pretty rigid. Finish is amazing I like flat finish. No smell during print or very very little. after you get all your setting perfect, it's print very easly. I've create 3 profiles .16,.20 and .28. print with 10-15mm/s less the your favorite print speed and you get a very good quality print. Overall, I really like that filament, took me about 500g to get set with all my profiles and settings. Now I will re-order a couple more colors and that filament in my #2 favorite filament. #1 is PETG for it's overall advantage and #3 is PLA, easy to print give you a good result but 0 overall durability. if you have only print PLA in you life, good luck! ;)

The eSun Black ABS+ filament prints great. I has relatively good adhesion to the bed when using some glue. It prints quite similar to PLA, just a bit more hot. I printed a temp tower and the temps all look good from 225-250. The print quality is good, layer lines also don't show too much. The smell isn't overwhelming either. Overall would really recommend!

Very good adhesion with practically no warping. Definitely like it!

Really good price and product. Easy printing for me.

Genuine bonafide black for your voron. This stuff is the bees knees, the cats meow, the ducks guts. You get it, it's freaking awesome. Hardly warps, sticks to your pei like glue til it cools then lifts off with a gentle poke. I go through tons of this stuff, once you get tuned in you can feed in any colour and they will pretty much work without tuning. Can't say enough good things.

Fantastic filament. Unique looking colour, high quality, and great performance during deposition.

Always a good filament for me.

Really like the ESun ABS+, never had any problem with this filament. very consistent result, no jam. Perfect The one I prefer is black because it has almost none existent smell

Easy to print. Nice surface mate finish.

Good filament for the price. You must buy an ABS "Plus", because normal ABS is warping to much. Smelled less than other brands I have tried. The surface finish is good. But it's not an outstanding external finish. Otherwise, it make the job. Luc