eSUN ePLA Matte Rainbow Filament - 1.75mm 1kg

NOTE: This filament requires printing in slow speed 40-50 mm/s and temperature at 205℃ -215℃ to achieve best results. Direct drive is preferred as the material is softer than regular PLA.

Please note the filament color order will vary per spool.

Introducing Matte PLA Filament by eSUN

ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. ePLA-Matte has high rigidity and does not require an enclosure. It has low shrinkage, no warping or cracking, and is suitable for large-size model printing. The support is easy to peel from the surface with a  smooth and flat contact surface. There will be no irritating odor during printing, which is safe and environmentally friendly.

The matte surface is delicate and does not show layer lines. The filament is not easy breakable, which contributes to a smooth printing experience. It can be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models. 

Note: ePLA-Matte lines are softer than other lines, so the extruder's tightness adjustment should not to be too tight, in case to affect printing.

Features:

• Environmental friendly
• Cost-effective
• High-speed printing
• Easy to peel off the support 
• Excellent printability
• Hard to break
• Matte surface effect
• Low density