Your cart is empty
Looks like you haven't added anything to your cart yet
|
Clear |
PETG-Basic is an economical PETG product that combines the advantages of PLA and ABS. It has various colors, high toughness and excellent printing performance. The printed model has good gloss surface and good dimensional stability, without shrinkage and warping.
Sellingpoint
- High cost efficient
- High toughness and high brightness
- Excellent printing performance
Stable Printing Performance
Not easy to warp
Not easy to shrink
Good dimensional stability
Combines The Advantages of PLA and ABS
High Toughness High Strength
Improves Drawing
Improves Nozzle Sticking
Easy to Print
Waterproof and sunproof
Rugged and durable
Glossy surface
Beautiful line color
Downloads
Parameter Information
| Density(g/cm3) | 1.27 |
| Melt Flow Index | 22（250℃/2.16Kg） |
| Heat Distortion Temp(℃,0.45MPa) | 73 |
| Tensile Strength(MPa) (XY) | 68.41 |
| Tensile Strength(MPa)(Z) | 35.84 |
| Elongation at Break(%)(XY) | 7.56 |
| Elongation at Break(%)(Z) | 3.17 |
| Flexural Strength(MPa)(XY) | 100.2 |
| Flexural Strength(MPa)(Z) | 59.7 |
| Flexural Modulus(MPa)(XY) | 2636.66 |
| Flexural Modulus(MPa)(Z) | 2207.6 |
| IZOD Impact Strength(kJ/㎡)(XY) | 2.28 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.06 |
| Extruder Temperature(℃) | 240-260℃ |
| Bed temperature(℃) | 75-90℃ |
| Fan Speed(％) | 50-100% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
No reviews yet.
- Choosing a selection results in a full page refresh.