PETG-ESD line resistivity as low as 10^7Ω/m, the surface resistivity of the printed model is as low as 10^9Ω/m, good resistance to static electricity, can effectively reduce dust adhesion and prevent electrostatic breakdown damage to electronic components. Antistatic PETG is simple to use, you can use ordinary PETG material parameters for direct printing, you can get good printing results, with a lower resistivity while still maintaining the excellent characteristics of PETG only toughness.
Antistatic And Dust-proof
Highly Abrasion Resistant
Excellent Printability
Odourless Printing
Electrical and electronic components
Industrial applications
Mechanical components




The higher the resistivity, the easier to generate static electricity and accumulate static electricity, which is not conducive to static discharge; Materials with lower resistivity are more prone to leakage of static electricity, making them less likely to accumulate static electricity


Downloads
| Printout Testing | Parameter |
|---|---|
| Density (g/cm³) | 1.22 |
| Melt Flow Index (230°C/5kg) | 18.1 |
| Heat Distortion Temp (°C, 0.45MPa) | 68 |
| Tensile Strength (XY) MPa | 48.11 ± 0.5 |
| Tensile Strength (Z) MPa | 19.34 ± 5.8 |
| Flexural Strength (XY) MPa | 77.7 ± 0.7 |
| Flexural Strength (Z) MPa | 41.2 ± 3 |
| Flexural Modulus (XY) MPa | 2162.79 ± 61 |
| Flexural Modulus (Z) MPa | 1483.12 ± 58 |
| Elongation at Break (XY) % | 8.97 ± 1.6 |
| Elongation at Break (Z) % | 2.52 ± 0.75 |
| IZOD Impact Strength (XY) kJ/m² | 4.95 |
| IZOD Impact Strength (Z) kJ/m² | 1.93 |
| Print Setting | Recommended |
|---|---|
| Extruder Temperature (°C) | 240–260 |
| Bed Temperature (°C) | 70–90 |
| Fan Speed (%) | 40–90 |
| Printing Speed (mm/s) | < 300 |
No reviews yet.