Your cart is empty
Looks like you haven't added anything to your cart yet
|
Hornfels | ||
|
Granite | ||
|
Tiger-Porphyry | ||
|
Quartzite | ||
|
Sandstone | ||
|
Limestone | ||
|
Pegmatite | ||
|
Blueschist |
PLA rock using matte formula, create a dull and frosted surface, reproducing the color of the rock, the two-color gradient method restored the layered texture of the rock circle. The color change of the products is full of creativity. The strength of PLA-Rock is high and the filament is not easy to break, ensuring the continuity and stability of long-term printing and avoiding the trouble of nozzle clogging.
Selling Point
Matte Surface
Eco-friendly
Easy to Peel The Support
Excellent Printability
Matte Surface
PLA-Rock Filaments adopts a matte formula, with a dull matte texture on its surface
Spiral Gradient Texture
Taking materials from rocks and using a dual color gradient method to restore the layered texture of the lithosphere, make the colors changeable with lots of fun
Excellent Printing Performance
High strength and not easy to break, ensuring the continuity and stability of long-term printing and avoid the trouble of nozzle clogging.
Parameter Information
| Value | |
|---|---|
| 3D Printer Filament | PLA-Rock |
| Density (g/cm3) | 1.25 |
| Melt Flow Index (g/10min) | / |
| Heat Distortion Temp (°C, 0.45MPa) | 52.3 |
| Tensile Strength (MPa) (XY) | / |
| Tensile Strength (MPa) (Z) | 18.08 |
| Elongation at Break (%) (XY) | / |
| Elongation at Break (%) (Z) | 2.05% |
| Flexural Strength (MPa) (XY) | 55.8 |
| Flexural Strength (MPa) (Z) | / |
| Flexural Modulus (MPa) (XY) | 2705.1 |
| Flexural Modulus (MPa) (Z) | / |
| IZOD Impact Strength (kJ/m²) (XY) | 4.43 |
| IZOD Impact Strength (kJ/m²) (Z) | / |
| Extruder Temperature (°C) | 210-230°C |
| Bed temperature (°C) | 45-60°C |
| Fan Speed (%) | 100% |
| Printing Speed (mm/S) | <250mm/s |
| Heated Bed | Need |
- Choosing a selection results in a full page refresh.