Filaments Depot PLA Mystery Color

Mystery Color are filaments color that didn't turn out exactly as anticipated, typically due to the transition between different colors in our filament extrusion process. The filament remains perfectly usable for printing, made with 100% Grade A Virgin PLA.

This filament is ideal for those who do not mind the color of the PLA Filament. 

1kg (2.2lbs) spool of Standard PLA filament manufactured in Canada vacuum sealed with a desiccant pack.

• Material: 100% Grade A Virgin PLA 
• Specific gravity : > 1(density: 1.23 ~ 1.27g/ml (25 °C))
• 116 Rockwell Hardness
• 53MPa tensile strength @Yield (one of the strongest on the market)
• 5% Elongation @Yield
• Extruded from high-quality raw materials
• Uses an advanced 2-step drying process to reduce water content resulting in more stable material
• FDA approved raw material with non-toxic pigments
• Coiled in a recycled cardboard spool to easily monitor consumption. Vacuum sealed with desiccant bag for optimal moisture control

Printing Parameters

• Printing Temperature : 190°C - 230°C
• Heated Bed: PLA can be printed with or without a heated print bed. However, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 60°C.
• First layer usually 5°C-10°C higher than subsequent layers.
• Sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.
• Cooling Fan: Highly recommended.
• Empty Spool Weight : 140 Grams 
• Gross Weight :1140-1170 Grams 
• Net Weight : 1KG 
  

To make it compatible with Bambu Lab AMS, you can use these Cardboard Spool Ring. 

Downloads

Filaments Depot PLA MSDS