{"id":8058609291,"title":"Proto-pasta PLA Carbon Fiber - 1.75mm, 500g Spool","handle":"pla-carbon-fiber-1-75mm","description":"\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv\u003e\n\u003ch1 id=\"yui_3_17_2_1_1425414714451_24288\"\u003e\u003cspan id=\"yui_3_17_2_1_1425414714451_24287\"\u003eThe Original Easy Printing Exotic - New lower price!\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThe original is still the best! World's First Carbon Fiber PLA was kickstarted by ProtoPlant more than 2 years ago. Others try, but can't match the quality and ease of printing experience afforded by this product. Now available at a cost low enough for everyday printing, try a mammoth 3kg spool for large format printing! 1.75mm diameter 3kg spools contain more than 1 km of filament!  How cool is that?!?!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProto-pasta Carbon Fiber PLA\u003c\/strong\u003e is based on our easy printing, high quality PLA. Made from the highest quality, dry ingredients and extruded with care in our Washington facility on our own purpose-built extrusion systems. CFPLA prints are demonstrably more rigid with easy processing (often using standard PLA settings) and support removal.  Excellent layer adhesion and minimal warpage even without a heated bed make this a great everyday exotic for accurate parts. Layer lines disappear with the beautiful matte black finish.  Also has a slight sheen due to the embedded carbon making it very photogenic!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem id=\"yui_3_17_2_7_1419892303855_2992\"\u003e**This filament is slightly more abrasive than standard PLA. Be prepared to replace your nozzle and do 1st layer adjustment after prolonged use or upgrade to a \u003ca title=\"Wear Resistant Nozzles\" href=\"http:\/\/www.proto-pasta.com\/collections\/retail\/products\/wear-resistant-nozzle\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewear resistant nozzle\u003c\/a\u003e for less maintenance.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_51937\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2942\" class=\"sqs-block-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 1.75 \u0026amp; 2.85 (3) mm diameters.\u003c\/li\u003e\n\u003cli\u003e500g is on a 8\" diameter spool \u0026amp; 3kg is on a 12\" diameter spool.\u003c\/li\u003e\n\u003cli\u003eUsable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"yui_3_17_2_7_1419892303855_2972\"\u003e\u003cem\u003eIn filament form, CFPLA is slightly more brittle than standard PLA, and requires extra care when handling. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-02772462f7d22eb6720f\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2978\" class=\"sqs-block-content\"\u003e\n\u003cp\u003eProcessing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles and\/or bowden type machines,\u003c\/p\u003e\n\u003cp\u003eWe frequently print using direct-drive systems with 0.4mm nozzles and print as high as 240C, though suggest 0.6mm and 210-230C for the best experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-01-29T12:26:00-05:00","created_at":"2017-01-29T12:26:44-05:00","vendor":"ProtoPasta","type":"Filaments","tags":["1.75mm","3D Printer Filament","Carbon Fiber","Filament","HTPLA","PLA","Special PLA 1.75 mm","Special PLA 1.75mm"],"price":3400,"price_min":3400,"price_max":3400,"available":false,"price_varies":false,"compare_at_price":4500,"compare_at_price_min":4500,"compare_at_price_max":4500,"compare_at_price_varies":false,"variants":[{"id":26393869643,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRPS-FL-CF-PLA-1.75-500G","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Proto-pasta PLA Carbon Fiber - 1.75mm, 500g Spool","public_title":null,"options":["Default Title"],"price":3400,"weight":1000,"compare_at_price":4500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"640970861890","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.digitmakers.ca\/cdn\/shop\/products\/Carbon-fiber_bcbea527-e8a4-4882-a653-7a76f3f743b2.jpg?v=1613452902"],"featured_image":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Carbon-fiber_bcbea527-e8a4-4882-a653-7a76f3f743b2.jpg?v=1613452902","options":["Title"],"media":[{"alt":"Proto-pasta PLA Carbon Fiber - 1.75mm, 500g Spool - Digitmakers.ca","id":94740840484,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Carbon-fiber_bcbea527-e8a4-4882-a653-7a76f3f743b2.jpg?v=1613452902"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.digitmakers.ca\/cdn\/shop\/products\/Carbon-fiber_bcbea527-e8a4-4882-a653-7a76f3f743b2.jpg?v=1613452902","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv\u003e\n\u003ch1 id=\"yui_3_17_2_1_1425414714451_24288\"\u003e\u003cspan id=\"yui_3_17_2_1_1425414714451_24287\"\u003eThe Original Easy Printing Exotic - New lower price!\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThe original is still the best! World's First Carbon Fiber PLA was kickstarted by ProtoPlant more than 2 years ago. Others try, but can't match the quality and ease of printing experience afforded by this product. Now available at a cost low enough for everyday printing, try a mammoth 3kg spool for large format printing! 1.75mm diameter 3kg spools contain more than 1 km of filament!  How cool is that?!?!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProto-pasta Carbon Fiber PLA\u003c\/strong\u003e is based on our easy printing, high quality PLA. Made from the highest quality, dry ingredients and extruded with care in our Washington facility on our own purpose-built extrusion systems. CFPLA prints are demonstrably more rigid with easy processing (often using standard PLA settings) and support removal.  Excellent layer adhesion and minimal warpage even without a heated bed make this a great everyday exotic for accurate parts. Layer lines disappear with the beautiful matte black finish.  Also has a slight sheen due to the embedded carbon making it very photogenic!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem id=\"yui_3_17_2_7_1419892303855_2992\"\u003e**This filament is slightly more abrasive than standard PLA. Be prepared to replace your nozzle and do 1st layer adjustment after prolonged use or upgrade to a \u003ca title=\"Wear Resistant Nozzles\" href=\"http:\/\/www.proto-pasta.com\/collections\/retail\/products\/wear-resistant-nozzle\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewear resistant nozzle\u003c\/a\u003e for less maintenance.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_51937\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2942\" class=\"sqs-block-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in 1.75 \u0026amp; 2.85 (3) mm diameters.\u003c\/li\u003e\n\u003cli\u003e500g is on a 8\" diameter spool \u0026amp; 3kg is on a 12\" diameter spool.\u003c\/li\u003e\n\u003cli\u003eUsable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"yui_3_17_2_7_1419892303855_2972\"\u003e\u003cem\u003eIn filament form, CFPLA is slightly more brittle than standard PLA, and requires extra care when handling. \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-02772462f7d22eb6720f\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2978\" class=\"sqs-block-content\"\u003e\n\u003cp\u003eProcessing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles and\/or bowden type machines,\u003c\/p\u003e\n\u003cp\u003eWe frequently print using direct-drive systems with 0.4mm nozzles and print as high as 240C, though suggest 0.6mm and 210-230C for the best experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

Proto-pasta PLA Carbon Fiber - 1.75mm, 500g Spool

Product Description
$34.00 $45.00
Maximum quantity available reached.

The Original Easy Printing Exotic - New lower price!

The original is still the best! World's First Carbon Fiber PLA was kickstarted by ProtoPlant more than 2 years ago. Others try, but can't match the quality and ease of printing experience afforded by this product. Now available at a cost low enough for everyday printing, try a mammoth 3kg spool for large format printing! 1.75mm diameter 3kg spools contain more than 1 km of filament!  How cool is that?!?!

Proto-pasta Carbon Fiber PLA is based on our easy printing, high quality PLA. Made from the highest quality, dry ingredients and extruded with care in our Washington facility on our own purpose-built extrusion systems. CFPLA prints are demonstrably more rigid with easy processing (often using standard PLA settings) and support removal.  Excellent layer adhesion and minimal warpage even without a heated bed make this a great everyday exotic for accurate parts. Layer lines disappear with the beautiful matte black finish.  Also has a slight sheen due to the embedded carbon making it very photogenic!

**This filament is slightly more abrasive than standard PLA. Be prepared to replace your nozzle and do 1st layer adjustment after prolonged use or upgrade to a wear resistant nozzle for less maintenance.

  • Available in 1.75 & 2.85 (3) mm diameters.
  • 500g is on a 8" diameter spool & 3kg is on a 12" diameter spool.
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!

In filament form, CFPLA is slightly more brittle than standard PLA, and requires extra care when handling. 

Processing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles and/or bowden type machines,

We frequently print using direct-drive systems with 0.4mm nozzles and print as high as 240C, though suggest 0.6mm and 210-230C for the best experience.

Sku: PRPS-FL-CF-PLA-1.75-500G
Vendor: ProtoPasta
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !

Price Match

 Contact us here!

We match all competitors pricing!

You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you're getting honest value for your money.

Price match for retail store

We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor's store or website (including shipping, handling and fees, if applicable within Canada)

Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.

Price match for online only website

If you find an identical item for less at a Canadian online only website, we will match their price (including shipping, handling and fees, if applicable).

How to price match in-store:

When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor's website.

How to price match on DigitMakers.ca

Please Email : Sales@digitmakers.ca

Please make sure you have the following information before contacting us so that we can assist you as quickly as possible:

  • Your full name and phone number
  • The complete URL (web address) of product page on the competitor's website (Canada Only Accepted) 
  • Details of the product name, brand and model
  • Details of the price difference (including shipping, handling and other fees, if applicable)

 

Our goal is to provide everyday low prices on all of our Items 

Related Products