Protopasta High Performance HTPLA - Carbon Fiber - various colors

• Improved toughness for less breaking when handling and easier processing
• Higher HDT when heat treated for maintaining properties to higher temperatures.

Compared to HTPLA, HTPLA-CF has:

• Improved surface hardness for less wear in abrasive environments
• Less shrinkage and distortion for more accurate parts

HTPLA-CF, like Aromatic Coffee, is based on our High Perfomance HTPLA v2.0, so it prints easily and can be heat treated for higher temperature performance with a potential Heat Deflection Temperature (HDT) in excess of 140C (285F) depending on processing. We had good results when heat treating in an oven at 110C (225F) for an hour. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts must be baked above 60C for any crystallization to occur.

• Size : 1.75
• Weight : 500g 8" diameter spool only

Carbon Fiber is somewhat abrasive, so consider upgrading to a wear resistant nozzle for less regular maintenance.

The manufacturer achieved good results were achieved using standard PLA parameters and standard build surface preparation (blue tape or glue stick). No heated bed required.