Welcome to Digitmakers.ca!
High precision needle bearing that is used in our Bondtech drive gears, for shaft diameter 3.0 mm, two bearings is used for one drive gear.
This mount for BMG extruder is CNC machined to precise tolerances in 3 mm thick aluminium that assures a secure and stable mounting for the extruder.
Bondtech now brings you the best and lightest performing extruder on the market that combines low weight with high feeding capacity together with our proven and highly celebrated Dual-Drive technology for maximum performance without grinding and slipping. For 1.75 mm size filament only.
The Bondtech BMG utilizes an internal gearing ratio o...
The Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.
This extruder is optimized for the Mosquito / Mosquito Magnum hotends with and integrated torque lock system to make the interface very strong and...
Bondtech DualDrive gears for 1.75 mm filament, Precision custom cnc machined with extreme precision guarantees that you get the grip you always wanted.Manufactured in hardened steel with an protective surface treatment will give you long lifetime and extreme reliability.The gears come as a set consisting of a Primary drivegear with a M3 setscre...
This custom bracket for mounting the Bondtech Mini onto the Wanhao I3 printer without any modification to the original mount, makes the installation really simple and straight forward.Made of 2mm steel. Laser cut & bent + powder coated in black finish.Weight 71 grams
This Kit comes with CR10-S Mount
This extruder upgrade kit will solve your feeding and grinding problems and will also give you higher resolution that will improve surface quality. It will also allow to print faster with sustained quality and no risk for grinding the filament.It features our lightweight BMG extruder with internal 3:1 gearing ...
The Wanhao D9 kit combines high performance with resolution and low weight and a compact building envelope. Together with BondTech proven and highly celebrated Dual-Drive technology you can expect problem free material feeding. This extruder is used with the factory hotend but can also be used with the MicroSwiss upgrades.
4X higher extrusion...
Now we are releasing our kit for FlashForge Creator Pro 2016 Dual Nozzle. This coldblock differs from the model used on Makerbot replicators & clones and are made especially to fit Flashforge Creator Pro 2016This kit gives you grinding free filament feed for your printer with our proven DualDrive technology with precision machined gears in ...
This extruder upgrade kit will solve your feeding and grinding problems and will also give you higher resolution that will improve surface quality. It will also allow to print faster with sustained quality and no risk for grinding the filament.It features our new lightweight BMG extruder with internal 3:1 gearing ratio combined with our DualD...
Our new Bondtech Extruder Universal is based on our revolutionary new DualDrive technology that gives the best performance that is available today on the market.The V2 designs now allow for booth a Bowden and a Direct-drive setup according to your choice. The unit is ready for Direct drive use, for Bowden use you need the additional Bowden ad...
Bondtech upgrade kit for Makerbot Replicator 2X dual nozzle.
This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament.
The housing parts are professionally SLS printed in polyamide for maximum strength a...
Bondtech Mini with Dual-Drive gears that grips the filament from both sides without any slippage or grinding as an upgrade kit for the Wanhao I3 printer.The smaller effective diameter of the drivegear will increase the torque by about 50% and also the resolution will increase with 50% since the E-step value is 140 compared with the 96 as the s...
Hardened and precision ground shaft for the Bondtech gear kits.
Nema17 geared stepper with 5.18:1 ratio and a planetary gear reducer. A 700 mm long PC2510 cable with quick-fit connectors. For best performance it should be driven with 24V, please adjust your stepper driver to output max 1.2A
25mm long Nema17 Pancake stepper with a detachable 30 cm long cable without connector. Weight: 153gMax Input current: 0.7A per phaseStep angle: 1.8 deg.Torque: 18 NcmOutputshaft diameter: 5.0 mmHole for mounting: 31 mm, 4xM3Motor lenght: 25mm
A screw kit for printable mounts,Kit includes:2 x M5 thread inserts2 x M5 x 10 low-head screwsThis thread insert are made to be mounted into plastic with heat. The easiest way is to make a special tip for a soldering iron and use it to melt the thread insert into the plastic.
This extruder upgrade kit is for the Prusa MK2.5 or the Prusa MK3 where you already have our Bondtech gears. This kit contains the necessary parts to convert to our freshly designed extruder that uses 3:1 gearing ratio for improved precision and resolution, optimized geometry for the heat-sink cooling and many other improved features.It also re...
The Bondtech QR Universal extruder for 1.75 mm filament gives you the markets highest performance, precision, and reliability with its DualDrive gear system. The new design makes it possible to change filament by activating the QuickRelease lever. The spring-loaded secondary drive gear adapts to filament variations and optimal pressure can be ...
This Upgrade For Black Stepper Motor Raise ( newer Versions)
his new compact, lightweight extruder upgrade for Raise3D printers will solve your feeding problems, improves surface quality and make it possible to print with faster speeds with sustained quality.This product uses lightweight Nema17 Pancake stepper motors combined with a 3:1 interna...
Replacement Shaft assembly for BMG ExtruderIncluding setscrew for primary drivegear
Thumbscrew replacement for Bondtech extruders.
1111 Flint RoadUnit #12North York, ONM3J 3C7