Your cart is empty
Looks like you haven't added anything to your cart yet
eSUN ABS+HS - 1.75 mm 1kg Spool - Various Colors
|
Black | ||
|
Blue | ||
|
Cold White | ||
|
Fire Engine Red | ||
|
Green | ||
|
Grey | ||
|
Natural | ||
|
Orange | ||
|
Red | ||
|
Silver | ||
|
White | ||
|
Yellow |
eABS+HS is a modified version of ABS material. Compared to conventional ABS, it exhibits lower shrinkage and superior interlayer adhesion, reducing the likelihood of warping and cracking during printing. It contains low VOC (Volatile Organic Compounds) components, resulting in a reduced odor during the printing process, making it more comfortable and stress-free. This material is optimized for high-speed printing, maintaining its performance even at higher speeds, providing an excellent printing experience. Additionally, it can be acetone polished to eliminate layer lines and further enhance the print quality.
Features
- Heat resistance
- Low odor
- Low shrinkage rate
- Strong performance and toughness
- High speed printing
- Acetone polishing is available
- Excellent printability
Notes:
1. The shrinkage rate of ABS+ material is large, so you should pay attention to heat preservation when printing, and print in a printer with a closed chamber.
2. The cooling of ABS+ is slightly worse. You can turn on a fan to improve the printing effect, or reduce the drape angle structure in the model; or try to reduce the speed to print.
Recommended for You
Browsing history
- Choosing a selection results in a full page refresh.