Your cart is empty
Looks like you haven't added anything to your cart yet
|
Blue Orange Green | ||
|
Gold Red Green | ||
|
Gold Green Black | ||
|
Copper Purple Green |
Three colors in One-line, this silk pla filament’s rich color matching makes the printed model full of mystery. You can observe the rich color combination performance from different angles of multi color pla filament.
Description:
The Multi color pla filament will bring you a wonderful dynamic sense through the three-color interlaced gradient. With the silk luster texture, ePLA-Silk Mystic's surface is smooth and does not show layer patterns; The silk pla filament is easy peel off, smooth and flat.
Selling point
Mystery Three-color
Silk glossy texture
Smooth surface
Easy to peel off
Excellent printability
Not easy to break
View more about PLA Filament
It can use with the eBOX Lite to keep the filament smoothly feeding to avoid twisting; Reduce the hanging angle structure in the model or reduce the speed for better cooling.
Parameter Information
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePLA-Silk Mystic |
| Density(g/cm3) | 1.256 |
| Heat Distortion Temp(℃,0.45MPa) | 54.7 |
| Melt Flow Index(g/10min) | 11.32（190℃/2.16kg） |
| Tensile Strength(MPa) | 57.64 |
| Elongation at Break(%) | 21.76 |
| Flexural Strength(MPa) | 78.70 |
| Flexural Modulus(MPa) | 2800.36 |
| IZOD Impact Strength(kJ/㎡) | 6.45 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature：210℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
No reviews yet.
- Choosing a selection results in a full page refresh.