Castable Wax Resin is a 20% wax-filled material for casting that can capture intricate features and offers a smooth surface finish for accurate castings with zero ash content and clean burnout. It is ideal for highly accurate patterns for casting and pressing dental prosthetics.
Castable Wax Resin produces highly accurate patterns for casting and pressing dental prosthetics. Tested at length by dental technicians, 3D printed patterns for copings, substructures, full contour crowns, and removable partial denture frameworks are made easy with Castable Wax Resin.
With high strength and stiffness, Castable Wax Resin makes it possible to print ultrafine and thin structures.
Contains 20% wax with zero ash content and clean burnout.
Printed parts are strong enough to handle with no post-cure required, meaning they are ready to use right away.
Easily remove light-touch support tips that don’t leave dimples in your parts.
Ensure shape retention for thin patterns such as wire filigree.
Castable Wax Resin is ideal for both prototyping and direct investment casting of lightweight, intricate jewelry.
Castable Wax Resin does not require post-curing. Allow parts to fully dry before casting.
| Parameter |
Value |
|---|---|
|
Ultimate Tensile Strength |
12 MPa |
|
Tensile Modulus |
220 MPa |
|
Elongation |
13% |
|
Temp @ 5% Mass Loss |
249 ºC |
|
Ash Content (TGA) |
0.0 - 0.1% |
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from green parts, printed using Form 2, Castable 50 μm Fine Detail settings and washed without post-cure.
No reviews yet.
Bambu Lab PLA Basic Filament (With Bambu Reusable Spool) 1.75mm - 1kg (Various Colors)
$29.99
